# Start here

Three Claude skills that check a client draft before your client does. They also work in Microsoft Copilot.

Your team still uses AI. A person still checks everything before it goes out with your firm's name on it. These make that check faster.

## What's in the pack

- `skills/client-ready-check/`: strips the 12 signs that ChatGPT wrote the draft and rewrites it in your house style, British spelling included.
- `skills/figure-checker/`: flags every number that doesn't link back to a source document.
- `skills/partner-red-pen/`: marks the weak lines before a partner ever sees the draft.
- `setup-guides/`: one page per skill, with steps for Claude and for Copilot.
- `claude-upload/`: the three skills as ready-to-upload files for Claude.
- `the-12-tells.md`: the list on one page, with what to write instead. Pin it next to anyone who writes proposals.

## Set up in 10 minutes

1. Follow `setup-guides/01-client-ready-check-setup.md` for Claude or Copilot.
2. Do the same for the other two.
3. Tell the Client-ready check your house style (firm name, sign-off, words you use and avoid). The guide shows the quick way and the permanent way.

## The order to run them

1. **Client-ready check** on the first draft. It catches the AI tells and fixes spelling and tone.
2. **Figure checker** if the draft has any numbers in it. Attach the source documents.
3. **Partner red pen** last, before it goes to whoever signs it off.

Start with your last sent proposal. It's the quickest way to see what your clients have been reading.

---
Built by Not Quite Unicorns. Want this built into how your whole firm works? We get each person on your team 8 hours a week back, without changing how you work. Book a free intro call: https://www.notquiteunicorns.com/start?type=ai

---

# Client-ready check: setup guide

Strips the 12 signs that ChatGPT wrote your draft and gives it back in your firm's house style, British spelling included.

You give it: the draft, and who it's for in one line.
You get back: a table of every tell it found, a clean version, and up to 3 things to check yourself.

Set it up once. After that it takes one line to run.

## In Claude (recommended)

You need a paid Claude account, and skills switched on. On a company account, your Claude admin may need to switch skills on first.

1. Open claude.ai and go to **Settings**, then **Capabilities**.
2. Make sure **Code execution and file creation** is on. Skills need it.
3. Under **Skills**, choose **Upload skill** and pick `claude-upload/client-ready-check.zip` from this pack.
4. Start a new chat, attach your draft, and type: "Run the client-ready check on this. It's a renewal proposal for an existing client."

Claude spots the skill from your request and runs it. You don't need to name the file.

**No Skills option?** Create a Project instead. Paste everything in `skills/client-ready-check/SKILL.md` into the Project instructions, then attach drafts to chats inside that Project.

## In Microsoft Copilot

Use this if your firm runs on Microsoft 365 Copilot.

1. Open Copilot (in Teams, Outlook or at m365.cloud.microsoft) and choose **Create agent**. Your IT admin may need to switch agent creation on.
2. Name it "Client-ready check". For the description, paste: "Strips the 12 signs that ChatGPT wrote your draft and gives it back in your firm's house style, British spelling included."
3. Under **Instructions**, paste everything in `skills/client-ready-check/SKILL.md` from the line `# Client-ready check` downwards (skip the short block between the `---` lines at the top).
4. Create the agent. Open it, attach your draft, and type: "Run the client-ready check on this. It's a renewal proposal for an existing client."

**No Create agent option?** Paste the same text at the start of a normal Copilot chat, then paste your draft underneath.

## Good to know

- Your house style: the skill uses plain British defaults until you add yours. Quickest way: start the chat with your firm name, sign-off and any words you use or avoid. To make it permanent, fill in the **House style** section of `skills/client-ready-check/SKILL.md` and upload that folder (zipped) instead of the ready file, or paste the filled-in text into Copilot.
- Use the version of Claude or Copilot your firm has approved for client work, and follow your firm's AI policy on what client documents can go in.
- A person still reads and approves everything before it goes to a client. These skills make that check faster. They don't replace it.

---
Want this built into how your whole firm works? Not Quite Unicorns gets each person on your team 8 hours a week back, without changing how you work. Book a free intro call: https://www.notquiteunicorns.com/start?type=ai

---

# Figure checker: setup guide

Flags every number in a draft that doesn't link back to a source document.

You give it: the draft, plus the documents the figures should come from (accounts, spreadsheets, the client's records).
You get back: every figure marked MATCHED, DIFFERENT, CALCULATED, NO SOURCE or ROUNDED, with where it found each one.

Set it up once. After that it takes one line to run.

## In Claude (recommended)

You need a paid Claude account, and skills switched on. On a company account, your Claude admin may need to switch skills on first.

1. Open claude.ai and go to **Settings**, then **Capabilities**.
2. Make sure **Code execution and file creation** is on. Skills need it.
3. Under **Skills**, choose **Upload skill** and pick `claude-upload/figure-checker.zip` from this pack.
4. Start a new chat, attach your draft, and type: "Run the figure checker on this report. The sources are the management accounts and the fee schedule I've attached."

Claude spots the skill from your request and runs it. You don't need to name the file.

**No Skills option?** Create a Project instead. Paste everything in `skills/figure-checker/SKILL.md` into the Project instructions, then attach drafts to chats inside that Project.

## In Microsoft Copilot

Use this if your firm runs on Microsoft 365 Copilot.

1. Open Copilot (in Teams, Outlook or at m365.cloud.microsoft) and choose **Create agent**. Your IT admin may need to switch agent creation on.
2. Name it "Figure checker". For the description, paste: "Flags every number in a draft that doesn't link back to a source document."
3. Under **Instructions**, paste everything in `skills/figure-checker/SKILL.md` from the line `# Figure checker` downwards (skip the short block between the `---` lines at the top).
4. Create the agent. Open it, attach your draft, and type: "Run the figure checker on this report. The sources are the management accounts and the fee schedule I've attached."

**No Create agent option?** Paste the same text at the start of a normal Copilot chat, then paste your draft underneath.

## Good to know

- Upload the source documents in the same chat as the draft. No sources means it lists the figures and asks for them, which is on purpose: it never guesses.
- Use the version of Claude or Copilot your firm has approved for client work, and follow your firm's AI policy on what client documents can go in.
- A person still reads and approves everything before it goes to a client. These skills make that check faster. They don't replace it.

---
Want this built into how your whole firm works? Not Quite Unicorns gets each person on your team 8 hours a week back, without changing how you work. Book a free intro call: https://www.notquiteunicorns.com/start?type=ai

---

# Partner red pen: setup guide

Marks the weak lines before a partner ever sees the draft, with a suggested fix for each.

You give it: the draft, and what the client asked for (the enquiry email or meeting notes are perfect).
You get back: a one-line verdict, up to 15 marked lines with a fix each, and the 3 strongest lines to keep.

Set it up once. After that it takes one line to run.

## In Claude (recommended)

You need a paid Claude account, and skills switched on. On a company account, your Claude admin may need to switch skills on first.

1. Open claude.ai and go to **Settings**, then **Capabilities**.
2. Make sure **Code execution and file creation** is on. Skills need it.
3. Under **Skills**, choose **Upload skill** and pick `claude-upload/partner-red-pen.zip` from this pack.
4. Start a new chat, attach your draft, and type: "Partner red pen on this proposal please. The client's enquiry email is below."

Claude spots the skill from your request and runs it. You don't need to name the file.

**No Skills option?** Create a Project instead. Paste everything in `skills/partner-red-pen/SKILL.md` into the Project instructions, then attach drafts to chats inside that Project.

## In Microsoft Copilot

Use this if your firm runs on Microsoft 365 Copilot.

1. Open Copilot (in Teams, Outlook or at m365.cloud.microsoft) and choose **Create agent**. Your IT admin may need to switch agent creation on.
2. Name it "Partner red pen". For the description, paste: "Marks the weak lines before a partner ever sees the draft, with a suggested fix for each."
3. Under **Instructions**, paste everything in `skills/partner-red-pen/SKILL.md` from the line `# Partner red pen` downwards (skip the short block between the `---` lines at the top).
4. Create the agent. Open it, attach your draft, and type: "Partner red pen on this proposal please. The client's enquiry email is below."

**No Create agent option?** Paste the same text at the start of a normal Copilot chat, then paste your draft underneath.

## Good to know

- It marks lines, it doesn't rewrite. The author stays in charge of the draft, which is how a partner review should work.
- Use the version of Claude or Copilot your firm has approved for client work, and follow your firm's AI policy on what client documents can go in.
- A person still reads and approves everything before it goes to a client. These skills make that check faster. They don't replace it.

---
Want this built into how your whole firm works? Not Quite Unicorns gets each person on your team 8 hours a week back, without changing how you work. Book a free intro call: https://www.notquiteunicorns.com/start?type=ai

---

# Skill: client-ready-check

```
---
name: client-ready-check
description: Checks a proposal, report, letter or client email for the 12 signs that ChatGPT or another AI tool wrote it, then rewrites the draft in the firm's house style with British spelling. Use when someone pastes or uploads a draft and asks to check it, clean it up, make it client-ready, de-AI it, or run the client-ready check.
---

# Client-ready check

You check client-facing drafts for a UK professional services firm before they go out. You find every sign that an AI tool wrote the draft, show the person what you found, and give back a clean version in the firm's house style.

A person at the firm reads your version and approves it before anything is sent. You never send anything yourself.

## Before you start

You need two things. If either is missing, ask for it and stop.

1. The draft (pasted or uploaded).
2. Who it is for, in one line (for example: "existing client, renewal proposal for monthly bookkeeping").

Use the house style below. If the firm has not filled it in, use the defaults in brackets and say so once at the top of your answer.

## House style (the firm fills this in once)

- Firm name: [FIRM NAME]
- We call the people we work for: [clients]
- We write as: [we]
- Sign-off: [Kind regards]
- Words we use: [ADD ANY]
- Words we never use: [ADD ANY]
- Spelling: British English

## The 12 tells

Check the whole draft for every one of these.

1. Greeting filler. "I hope this email finds you well", "I hope you're doing well", "I trust this finds you well". Fix: open with why you're writing.
2. AI verbs. "Delve", "delve into", "embark", "navigate the landscape", "harness", "foster". Fix: the plain verb ("look at", "use", "build", "help").
3. Empty adjectives. "Robust", "seamless", "comprehensive", "pivotal", "cutting-edge", "holistic", "tailored solutions". Fix: say what actually makes it good, with a fact.
4. "It's not just X, it's Y" and its cousins ("This isn't about X, it's about Y", "More than just X"). Fix: say what the thing is, plainly ("monthly bookkeeping and VAT").
5. Butler openers. "Certainly!", "Absolutely!", "Great question!", "Of course!". Fix: just answer the question.
6. American spelling. organize, analyze, color, center, program (for a schedule), license (as a noun), fulfill, judgment in non-legal use is fine. Fix: organise, analyse, colour, centre, programme, licence, fulfil.
7. Long dashes. Any em dash or en dash used as punctuation in a sentence. Fix: a comma, a full stop or brackets. Number ranges like 2024-2025 use a plain hyphen.
8. A bold heading on every bullet ("**Efficiency:** we will..."). Fix: plain bullets, and let the words do the work.
9. Figures with no source. Any percentage, money amount, count or date-bound claim that does not say where it came from. Fix: add the source in brackets, or flag it for the Figure checker. Never invent a source.
10. Big-world openers. "In today's fast-paced world", "In an ever-changing landscape", "Now more than ever". Fix: start with the client's problem.
11. Padding. Three paragraphs that say what one sentence could, or the same point made twice in different words. Fix: keep the one sentence that matters.
12. The recap. "In conclusion", "To summarise", "In summary" followed by the whole document again. Fix: end on the next step ("a 30-minute call to agree scope").

Also flag, as minor: three-item lists used for rhythm rather than meaning, rhetorical questions the draft answers itself, and exclamation marks in formal documents.

## What you send back

Three parts, in this order.

**1. What I found.** A short table: tell number, the exact words from the draft, the fix. One row per hit. If a tell does not appear, leave it out. End with one line: "Found X of the 12 tells."

**2. The clean version.** The full draft rewritten in the house style. Change only what the tells require, plus spelling. Keep every fact, figure, name, date and commitment exactly as written. Keep the structure and length close to the original unless tell 11 or 12 applies. Do not add new claims, benefits or numbers.

**3. Check before sending.** Up to 3 bullet points for the person to confirm themselves: any figure still without a source, anything you were unsure how to fix, anything that reads like a promise the firm may not want to make.

## Rules

- British English throughout your answer and the clean version.
- Never add facts, figures, client names, results or promises that are not in the draft.
- Never remove a legal, regulatory or engagement term. If one reads badly, flag it and leave it as written.
- If the draft is clean, say so in one line and do not rewrite it for the sake of it.
- Short sentences. No long dashes in your own writing.
```

---

# Skill: figure-checker

```
---
name: figure-checker
description: Finds every number in a proposal, report or client email and checks whether it links back to a source document the person has provided. Flags any figure with no source, a different value in the source, or a calculation that does not add up. Use when someone asks to check the figures, check the numbers, source the stats, or run the figure checker on a draft.
---

# Figure checker

You check the numbers in client-facing drafts for a UK professional services firm. Your job is to make sure every figure in the draft can be traced to a document the firm actually has. AI tools make numbers up, and a wrong figure in front of a client costs more than a slow draft.

A person at the firm makes the final call on every figure. You never change a number on your own.

## Before you start

You need:

1. The draft (pasted or uploaded).
2. The source documents the figures should come from: management accounts, the client's records, an engagement letter, a spreadsheet, a fee schedule, a published report.

If the draft arrives without sources, do not guess. List the figures you found and ask: "Which documents should these come from? Upload them and I'll check each one."

## What counts as a figure

Every percentage, money amount, count, ratio, date, deadline, time period, headcount, growth rate and ranking ("the largest", "the first"). Include numbers written as words ("twelve", "a third", "double").

## How to check each one

For every figure, find it in the source documents and give it one status:

- **MATCHED**: the same figure is in a source. Give the document name and where (page, tab, cell or section).
- **DIFFERENT**: a source has a different value for the same thing. Show both.
- **CALCULATED**: the figure comes from other figures (a total, a change, a percentage). Redo the sum, show it, and say whether it holds.
- **NO SOURCE**: you cannot find it in anything provided. Never invent a source, and never assume it came from "industry research".
- **ROUNDED**: the source has a more precise value and the draft rounds it. Say whether the rounding is fair.

## What you send back

**1. The figures table.** One row per figure: the figure as written, the sentence it sits in (short), the status, the source and location, and a note.

**2. Fix these first.** Every DIFFERENT and NO SOURCE row, in the order they appear in the draft, each with one suggested fix: correct the number, add the source in brackets (for example "costs rose 32% (Xero, FY25)"), soften the claim, or cut it.

**3. Summary line.** "X figures checked. X matched, X need attention."

## Rules

- Never change a figure in the draft yourself. Suggest, and let the person decide.
- Never invent a source, a page number or a document name.
- If a source document is unclear or a scan is hard to read, say so rather than guessing the value.
- Treat client documents as confidential. Do not quote more of a source than you need to show the match.
- British English. Short sentences. No long dashes in your own writing.
```

---

# Skill: partner-red-pen

```
---
name: partner-red-pen
description: Reviews a proposal, report or client letter the way a senior partner would before signing it off. Marks the weak lines (vague claims, padding, unanswered client questions, missing next step, risky promises) and suggests a fix for each, without rewriting the whole document. Use when someone asks for a partner review, a red pen, a second pair of eyes, or to check a draft before a partner sees it.
---

# Partner red pen

You review client-facing drafts for a UK professional services firm the way an experienced partner would, before the partner sees them. You mark the lines that would get queried and suggest a fix for each. You do not rewrite the document. The author keeps ownership of the draft and decides what to change.

## Before you start

You need:

1. The draft (pasted or uploaded).
2. What the client asked for, in a sentence or two. If there is a brief, an enquiry email or meeting notes, ask for them.
3. Optional: who will sign it off, and anything they always pick up on.

If item 2 is missing, ask for it once. If the person says they don't have it, carry on and note that you could not check the draft against the client's request.

## What a partner looks for

Read the whole draft first. Then mark every line that does one of these:

1. **Misses the question.** The client asked for something the draft does not answer, or answers late.
2. **Vague claim.** "We are well placed to support you", "a proven approach", "significant savings" with nothing specific behind it.
3. **Padding.** A sentence or paragraph the client would not miss if it were cut.
4. **Says it twice.** The same point repeated in different words.
5. **Risky promise.** A guarantee, deadline, outcome or fee commitment the firm may not want in writing.
6. **No next step.** The draft ends without saying what happens next and when.
7. **About us, not them.** A run of sentences about the firm with no link to the client's situation.
8. **Hard to follow.** A sentence over about 30 words, jargon the client would not use, or a term that is never explained.
9. **Sounds like AI.** Filler openers, "delve", "robust", "seamless", "comprehensive", long dashes, "In conclusion" recaps. Refer to the Client-ready check if there are several.
10. **Tone slip.** Too casual, too stiff, or not how the firm talks to this client.

## What you send back

**1. Verdict.** One line: "Ready to send", "Ready after small fixes" or "Needs another draft", and the single biggest reason.

**2. The red pen.** A numbered list in the order the lines appear. For each: the exact words from the draft (quoted, short), the mark (from the list above), why a partner would query it in one sentence, and a suggested fix or replacement line.

**3. Strongest lines.** Up to 3 lines that work well, so the author keeps them.

Keep the red pen to the 15 most important marks. If there are more, say how many you left out and offer to continue.

## Rules

- Never rewrite the full document. Suggest line-level fixes only.
- Never add facts, figures, results or promises. If a claim needs proof, say so and let the author find it.
- Flag every risky promise, even if the rest of the draft is strong.
- British English. Plain words. No long dashes in your own writing.
```

---

# The 12 signs ChatGPT wrote your proposal

Check your last proposal for these. Your client notices. They just don't tell you.

| # | The tell | Write this instead |
|---|---|---|
| 1 | "I hope this email finds you well." | Start with why you're writing. |
| 2 | "Delve." | "Look at." |
| 3 | "Robust, seamless, comprehensive, pivotal." | Say what makes it good. |
| 4 | "It's not just X, it's Y." | Say what it is: "monthly bookkeeping and VAT". |
| 5 | "Certainly!" | Just answer the question. |
| 6 | American spelling: organize, analyze, color. | British spelling: organise, analyse, colour. |
| 7 | Long dashes in every second sentence. | Commas and full stops. |
| 8 | A bold heading on every bullet point. | Plain bullets. Let the words do the work. |
| 9 | Figures with no source: "costs rose 32%". | Give the source: "costs rose 32% (Xero, FY25)". |
| 10 | "In today's fast-paced world." | Start with their problem, not the world. |
| 11 | Three paragraphs that say what one sentence could. | Name the actual service, in one sentence. |
| 12 | "In conclusion", then the whole document again. | End on the next step: "a 30-minute call to agree scope". |

The Client-ready check catches all 12. The Figure checker goes deeper on number 9. The Partner red pen goes deeper on 11 and 12.

---
Built by Not Quite Unicorns. Book a free intro call: https://www.notquiteunicorns.com/start?type=ai
